DiscImageCreator (Page 117 of 142)

Uploaded.
https://www.mediafire.com/file/eq80y20l … st.7z/file

This subRtoW is rare. Not to detect as suberror.

========== OpCode[0xd8]: SubCode[2]: Check Drive + CD offset ==========
========== LBA[000000, 0000000]: Sub Channel ==========
      +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B
    P FF FF FF FF FF FF FF FF FF FF FF FF
    Q 41 01 01 00 00 00 00 00 02 00 28 32
    R 7F FF FF FF FF FF FF FF FF FF FF FF
    S 7F FF FF FF FF FF FF FF FF FF FF FF
    T 7F FF FF FF FF FF FF FF FF FF FF FF
    U 7F FF FF FF FF FF FF FF FF FF FF FF
    V 7F FF FF FF FF FF FF FF FF FF FF FF
    W 7F FF FF FF FF FF FF FF FF FF FF FF

I have a disc (Rayman CP Calcul) that is consistently giving a couple of bad sectors (same each time) when dumped with a Plextor (755), but the dump appears fine when dumped with an ASUS BW-16D1HT.

The sectors appear to have no sync when dumped with the Plextor.

Plextor logs: https://cdn.discordapp.com/attachments/ … P_logs.zip
Asus logs: https://cdn.discordapp.com/attachments/ … P_logs.zip

So which dump is correct? Is this a plextor bug or are these bytes actually shifted on the disc. If it is a plextor bug, can it be resolved?

Hi, I have dumped a disc with some errors which I believe are mastering errors since this publisher's discs always have some, but the DIC dump doesn't match the dump from IsoBuster or CloneCD. The IsoBuster dump has only one sector where user data doesn't match but can't read the last 4 sectors which CloneCD can, and they both have the same error sector. I checked the CloneCD image using the DIC subfile, and it has only one error from that sector, so is the CloneCD dump correct in this case?

Also, DIC can't dump disc 2 of this game, close itself right after pregap checking, this disc shares the same problem where IsoButser cannot read the last 4 sectors while CloneCD can.

Logs: https://mega.nz/folder/bqwx3AJI#KbPnXPLLw3jif-c_HahVBQ

I dumped again with Fast Error Skip turned off, and hashes match previous dumps.

Logs: https://mega.nz/file/TzI2FLLJ#QFoe4l72u … KzuC1s9vTg

I want to dump X360 discs using the trap disc method. Can I just create any iso with dummy files to the needed size and burn it to DVD+R DL? I can't find any pressed disc as big as 4267015. Or can I dump this disc: http://redump.org/disc/73691/

And increase its size with dummy files using UltraISO for example? Or can I just burn any random XGD3 disc and use it as the trap disc?

And how does it work in detail, do I have to set the manual layer break to half of the size of my iso size or half of the calculated size? Can I create one trap disc over 4267015 and use it for all 3 xbox disc formats?

OK, I will try burning an XGD3 iso and use it as the trap disc. Layerbreak the burn is 2133520 I think? Should I burn the DVD+R DL as booktype DVD-ROM or as normal?

EDIT: 2133520 isn't even possible on DVD+R DL? I think I need a burner with BurnerMAX feature for this?

Ah, I said there is no disc that can burn XGD3. If you dump it, use XBOX360 drive. Kreon drive also can dump it without SSv2.

As you say, the last 4 sectors are mastering error, but in relation to the other error sectors, I'm not sure which result of the tool is correct.

Is there PVD in LBA 16? Check by Isobuster, please.

Uploaded. https://www.mediafire.com/file/eq80y20l … st.7z/file
Test, plz.

https://github.com/saramibreak/DiscImag … g/20210701
*2021-07-01
- fixed: only use 1st 0xb0 (FULL TOC)
- fixed: escaped the encrypted PARAM.SFO
- fixed: ASUS FW does not support dumping multi-session discs for my tool because it can't read the lead-in sector of the 2nd session
- fixed: 0x7f, 0xff...0xff of subRtoW are not detected as error
- fixed: failed to dump the GD-ROM
- fixed: cannot get PVD due to one pregap sector
- fixed: failed to dump the multi-session disc that has offsets over 2352 bytes (Sonic The Hedgehog (Germany) (4 014548 004785))