DiscImageCreator (Page 55 of 141)

Of course But it's not a problem.

Solution 1: User inserts disc normally, DIC reads the TOC and leadout (to know the image length), then ejects it and asks to do the swapping (like, "insert the trap audio disc and press any key" => "swap the disc and press any key").

Solution 2: User runs DIC after swapping, DIC reads data and subchannel into .scr + .sub, then ejects the tray, then inserts the tray, then reads the TOC and leadout, then cuts the image to tracks and does the descrambling. Or you can ask the leadout value via .exe parameter (to know how many sectors to read into image) and read only TOC after ejecting/inserting the tray.

Added this, but still buggy, I think.

How to use

1. insert the audio trap disc to a supported drive.
2. run (stop spinning disc) -> DiscImageCreator.exe stop [DriveLetter]
3. use a pin to press the escape eject button, so the tray will eject (or remove the drive cover).
4. insert the disc and run -> DiscImageCreator.exe close [DriveLetter] or gently push the tray back (or put the drive cover back on).
5. run (start dumping scrambled img) -> DiscImageCreator.exe swap [DriveLetter] foo.bin [DriveSpeed(0-72)]
6. when dumping finished, the drive tray open automatically.
7. The drive tray close automatically after 10000 msec.
8. Read TOC and img is descrambled automatically.

Also added this in cd command.
http://forum.redump.org/post/60437/#p60437

Works almost fine for me. The dump is correct, but the cue is missing the CATALOG entry (the drive itself reads the subchannels correctly).

Also, the image sizes (and the checksums) of the .scm and .img files are incorrect (too small). Split tracks are correct.

And why doesn't it show any progress (which sector is being read) during the dumping process?

http://redump.org/disc/32569/ -- this disc was used.

Did proper support ever get added for the GameShark Pro update CDs? http://redump.org/discs/system/psxgs/

Where did we leave off on that? One of our member has a dozen waiting to dump.

I'm having a real hard time finding any of the verified Plextor drives recommended on the DIC Readme.
I've noticed, though, there are two BD drives listed under the CD (media). Can these models dump CDs correctly? Or I'm reading it wrongly and they refer to dumping BD discs (PS4 and XO)?

I'm trying to figure out if everything will need to be redumped. Fine if necessary, but the sooner we have an answers / solution, the more helpful it will be.

A new disc was added today: http://redump.org/disc/52142/

And as I said, another dozen are ready to be dumped when we have the answers...

I'm in touch with a dumper about dumping some rare 3DO discs including Dinopark Tycoon, the disc is perfectly clean but he is getting c2 errors on this disc when dumping with DIC. Schrodinger said 3DO discs have had issues with DIC in the past,, here are the logs https://www.dropbox.com/s/uql7n11i9iiqk … 9.zip?dl=0

Uploaded in test branch.

*2018-05-22 test
- added: swap command (This is for non-Plextor drive)
- added: ls command (This shows maxium drive speed in command-line screen)
- added: Support PS2 unlicensed disc (needs to use /sf. This protect looks like a safedisc)
- added: GC/Wii dumping drive (support GCC-4160N, 4240N, 4243N, 4247N)
- added: Check subQ adr and RtoW before dumping of GD-ROM
- added: Check if PSX PAL or not (for /nl)
- added: Output .dat file for BD-ROM
- changed: Rereading the sector if crc16 of subQ is currupt, not rmsf or amsf
- changed: Disable beep except disc dumping command (cd, dvd etc.)
- fixed: Checking error of subQ track
- fixed: Reading path table record of GD-ROM (support path table size is over 2352)
- fixed: dumping CD-i ready (not unscramble the pregap sector)

Uploaded test version.
-added: support xbox security sector dumping (needs kreon's drive)

DiscImageCreator.exe xbox <driveletter> <filename>

@Admin or Moderator
Why xbox preserves the hash of Physical Format Information (PFI) and Manufacturing Information (DMI) in comments?
All DVD based disc (gc/wii, ps2 etc) have PFI and DMI but there isn't the hash in comments except xbox.

No difference, but some ide-usb controller can't get the drive name, so user who uses such a controller needs this flag.

I see, thx.

Uploaded test version.
-added: dumping PFI.bin and DMI.bin (all DVD based disc)

And uploaded a batch file for xbox. (run dic, ss_sector_range and FreeCell)
Please modify the path and drive letter individually.
http://www.mediafire.com/file/em1qbnh4i … mp.7z/file

                             Data Length: 4294967295
                 Recording Date and Time: 2010-01-06 04:59:56 +00:00
                              File Flags: 0 (Visible, File, Disassociated, File has't record format, Owner/Group ID has't, Final Directory Record)
                          File Unit Size: 0
                     Interleave Gap Size: 0
                  Volume Sequence Number: 1
               Length of File Identifier: 13
                         File Identifier: ARCHIVEPAX.GZ

Is this file really over 4GB size?