You are not logged in. Please login or register.
Redump Forum → General discussion → DiscImageCreator
DIC sub CloneCD_sub
In _subReadable.txt, I noticed it is not logging any TV-GRAPHICS instructions for track 01, even though the first track of this disc has CD+G content.
Is this the correct command syntax, or is there a particular flag I need to provide for "Pack mode sub"?
cd H:\ Information Society - Information Society (USA).bin 8 /q /s 2 Does not work. I tested with the latest nightly build of ares with its CD+G support for MegaCD.
When I replaced the DIC-generated .sub with the one generated by CloneCD, CD+G works.
You can test CD+G for yourself with the nightly build here: https://github.com/ares-emulator/ares/r … ag/nightly
Retry to dump using /c2. I confirmed that DIC-generated .sub (also CloneCD .sub) works by the other CD+G supported player (https://www.vector.co.jp/download/file/ … 27763.html). ares --- I don't know how to read the ccd-img-sub format.
Excellent, when I re-dumped with the /c2 flag re-enabled, CD+G works.
I saw something odd in the _20240216T230252.txt file (see the last line below):
cd F:\ Information Society - Information Society (USA).bin 8 /c2 20 /q /s 2
(Subs indexes).cue are opened
(Subs indexes)(Track 1).bin are opened
(Subs indexes)(Track 2).bin are opened
(Subs indexes)(Track 3).bin are opened
(Subs indexes)(Track 4).bin are opened
(Subs indexes)(Track 5).bin are opened
(Subs indexes)(Track 6).bin are opened
(Subs indexes)(Track 7).bin are opened
(Subs indexes)(Track 8).bin are opened
(Subs indexes)(Track 9).bin are opened
(Subs indexes)(Track 10).bin are opened
[F:ConcatenateFromPregapToLeadout][L:2984] GetLastError: 2, The system cannot find the file specified.With an ASUS BW-16D1HT with RibShark's 3.10 fw on build 20240216, the following error is produced with aborts the dump for dumping any Audio CD (works fine with build 20230606):
LBA[000000, 0000000]: [F:ReadCDForCheckingSubQ1stIndex][L:974]
Opcode: 0xbe
ScsiStatus: 0x02 = CHECK_CONDITION
SenseData Key-Asc-Ascq: 03-11-05 = MEDIUM_ERROR - L-EC UNCORRECTABLE ERROR
lpCmd: be, 00, 00, 00, 00, 00, 00, 00, 01, f8, 01, 00
dwBufSize: 2448I saw something odd
Added: show the error message.
Fixed: failed to dump audio disc (and CD-i Ready) when ASUS BW-16D1HT 3.02 is used.
https://www.mediafire.com/file/eq80y20l … st.7z/file
the following error is produced
3.02 did not occur. 3.10 mod only? I'm not sure.
If anyone looking for USB adapter with IS611 chipset,Unitek Y-3324 is another choice
bikerspade wrote:I saw something odd
Added: show the error message.
Fixed: failed to dump audio disc (and CD-i Ready) when ASUS BW-16D1HT 3.02 is used.
https://www.mediafire.com/file/eq80y20l … st.7z/filebikerspade wrote:the following error is produced
3.02 did not occur. 3.10 mod only? I'm not sure.
Confirmed to also occur on my 3.10 Ribshark firmware drive. Could potentially be linked to a similar issue aaru has where audio cd dumping is broken on Ribshark firmware drives, but that's just a hunch.
It works with build 20230606, so there was a regression at some point afterwards.
added RegenerateToc for dumping CD-i format with multi-track disc
https://www.mediafire.com/file/eq80y20l … st.7z/file
It works with build 20230606, so there was a regression at some point afterwards.
Would you try to dump these discs and see if you get the same error?
1. Audio only disc.
2. Data only disc.
3. Data + Audio disc.
1. Audio only disc (fails at this point)
LBA[000000, 0000000]: [F:ReadCDForCheckingSubQ1stIndex][L:974]
Opcode: 0xbe
ScsiStatus: 0x02 = CHECK_CONDITION
SenseData Key-Asc-Ascq: 03-11-05 = MEDIUM_ERROR - L-EC UNCORRECTABLE ERROR
lpCmd: be, 00, 00, 00, 00, 00, 00, 00, 01, f8, 01, 00
dwBufSize: 24482. Data only disc
http://redump.org/disc/2007/
AppVersion
32 bit, AnsiBuild, 20240224T144036
/c2 val2 was omitted. set [16]
/c2 val3 was omitted. set [0]
/c2 val4 was omitted. set [0]
/sf val was omitted. set [60]
CurrentDirectory
D:\MPF_3.1.0
WorkingPath
Argument: ISO\DN3D_REG\DN3D_REG.bin
FullPath: D:\MPF_3.1.0\ISO\DN3D_REG\DN3D_REG.bin
Drive: D:
Directory: \MPF_3.1.0\ISO\DN3D_REG\
Filename: DN3D_REG
Extension: .bin
StartTime: 2024-02-24T00:27:42-0600
Set the drive speed: 2822KB/sec
DiskSize of [D:\MPF_3.1.0\ISO\DN3D_REG]
Total: 22000951091200 bytes
Used: 2102318620672 bytes
---------------------------
Space: 19898632470528 bytes
=> There is enough disk space for dumping
Check if scrambled reading is supported
[INFO] This drive supports scrambled reading
Check if subchannel pack mode is supported
LBA[000000, 0000000]: [F:ReadCDForCheckingSubPack][L:1254]
Opcode: 0xbe
ScsiStatus: 0x02 = CHECK_CONDITION
SenseData Key-Asc-Ascq: 04-3e-02 = HARDWARE_ERROR - TIMEOUT ON LOGICAL UNIT
lpCmd: be, 00, 00, 00, 00, 00, 00, 00, 01, f8, 04, 00
dwBufSize: 2448
[WARNING] This drive does not support subchannel pack mode
Reading DirectoryRecord 25/ 25
Checking EXE 76
[INFO] Protection can't be detected. /sf, /ss is ignored.
This drive (BW-16D1HT 3.10 WM01601KLZN4DA2714 ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 0]
This drive (BW-16D1HT 3.10 WM01601KLZN4DA2714 ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 1]
This drive (BW-16D1HT 3.10 WM01601KLZN4DA2714 ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 2]
This drive (BW-16D1HT 3.10 WM01601KLZN4DA2714 ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 4]
Checking SubQ adr (Track) 1/ 1
Checking reading lead-out -> OK (LBA 50849)
Set OpCode: 0xbe, SubCode: 1(Raw)
Checking SubQ ctl (Track) 1/ 1
Creating .scm (LBA) 50849/ 50849
No C2 errors
Copying .scm to .img3. Data + Audio disc
http://redump.org/disc/86169/
AppVersion
32 bit, AnsiBuild, 20240224T144036
/c2 val2 was omitted. set [8]
/c2 val3 was omitted. set [0]
/c2 val4 was omitted. set [0]
/sf val was omitted. set [60]
CurrentDirectory
D:\MPF_3.1.0
WorkingPath
Argument: ISO\Manhole, The (USA)\Manhole, The (USA).bin
FullPath: D:\MPF_3.1.0\ISO\Manhole, The (USA)\Manhole, The (USA).bin
Drive: D:
Directory: \MPF_3.1.0\ISO\Manhole, The (USA)\
Filename: Manhole, The (USA)
Extension: .bin
StartTime: 2024-02-24T00:33:32-0600
Set the drive speed: 1411KB/sec
DiskSize of [D:\MPF_3.1.0\ISO\Manhole, The (USA)]
Total: 22000951091200 bytes
Used: 2102679584768 bytes
---------------------------
Space: 19898271506432 bytes
=> There is enough disk space for dumping
Check if scrambled reading is supported
[INFO] This drive supports scrambled reading
Check if subchannel pack mode is supported
LBA[000000, 0000000]: [F:ReadCDForCheckingSubPack][L:1254]
Opcode: 0xbe
ScsiStatus: 0x02 = CHECK_CONDITION
SenseData Key-Asc-Ascq: 04-3e-02 = HARDWARE_ERROR - TIMEOUT ON LOGICAL UNIT
lpCmd: be, 00, 00, 00, 00, 00, 00, 00, 01, f8, 04, 00
dwBufSize: 2448
[WARNING] This drive does not support subchannel pack mode
[INFO] Protection can't be detected. /sf, /ss is ignored.
This drive (BW-16D1HT 3.10 WM01601KLZN4DA2714 ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 0]
This drive (BW-16D1HT 3.10 WM01601KLZN4DA2714 ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 1]
This drive (BW-16D1HT 3.10 WM01601KLZN4DA2714 ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 2]
This drive (BW-16D1HT 3.10 WM01601KLZN4DA2714 ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 4]
Checking SubQ adr (Track) 17/17
Checking reading lead-out -> OK (LBA 111603)
Set OpCode: 0xbe, SubCode: 1(Raw)
Checking SubQ ctl (Track) 17/17
Creating .scm (LBA) 111607/111607
one Alpha-DVD log of redumper contribution, took me five hours for dumping,
no reply and no complain, please.
https://www.suruga-ya.jp/product/detail/186028357
log of redumper
https://mega.nz/file/M9pTjZQT#MPhH40YQG … X7JA30zwYU
Uploaded test version.
Windows: https://www.mediafire.com/file/eq80y20l … st.7z/file
Linux: https://www.mediafire.com/file/uw3e03kd … ar.gz/file
- changed the descrambling range.
-- support "audio track, data sector, there is a sync" http://forum.redump.org/topic/53678/dis … scrambled/
-- re-support descrambling the sector that bit 7 .. 5 of the mode byte is used. https://github.com/saramibreak/DiscImag … issues/269
- changed "subs control" and "subs indexes" to "subs desync".
-- changed the control flag of the cue file, it prefers TOC. https://github.com/saramibreak/DiscImag … issues/268
LBA[000000, 0000000]: [F:ReadCDForCheckingSubQ1stIndex][L:974]
Opcode: 0xbe
ScsiStatus: 0x02 = CHECK_CONDITION
SenseData Key-Asc-Ascq: 03-11-05 = MEDIUM_ERROR - L-EC UNCORRECTABLE ERROR
lpCmd: be, 00, 00, 00, 00, 00, 00, 00, 01, f8, 01, 00
dwBufSize: 2448
It's called when dumps the disc that pregap exists in the track 1.
EDIT (2024-03-10)
fixed failed to descramble of the multi-session disc with test version.
EDIT (2024-03-18)
fixed failed to dump GD-ROM with test version.
Why DIC doesn't show SecuROM in Copy Protection section?
Why DIC doesn't show SecuROM in Copy Protection section?
Would you upload DIC logs?
hkkane wrote:Why DIC doesn't show SecuROM in Copy Protection section?
Would you upload DIC logs?
Tested with DIC and Redumper,both doesn't show SecuROM in Copy Protection,
https://mega.nz/folder/xJFCRJSK#Kh3loBEZO9RUca6ec-IkIg
both doesn't show SecuROM in Copy Protection,
MPF problem? I'm not sure. Try to use old version. https://github.com/SabreTools/MPF/releases
IIRC newer versions of MPF (>2.4) are less proactive in unpacking CAB files.
https://github.com/saramibreak/DiscImag … g/20240401
*2024-04-01
- added output HFS Catalog Files
- added RegenerateToc for dumping CD-i format with multi-track disc
- changed the descrambling range
-- support "audio track, data sector, there is a sync"
-- re-support descrambling the sector that bit 7 .. 5 of the mode byte is used
- changed "subs control" and "subs indexes" to "subs desync"
- changed the control flag of the cue file, it prefers TOC
- changed checking CD+G sector
- fixed to dump the pregap file
- fixed fail to dump GD-ROM
- fixed dumping audio disc (and CD-i Ready) when ASUS BW-16D1HT 3.02 is used
- fixed dumping of the CD-i format with CD-DA
- fixed HFS time
- fixed UDF log
http://redump.org/disc/113764/
Dumping this disc has matching results between DiscImageCreator and Redumper, but DiscImageCreator throws 75 errors for some reason, whereas Redumper does not. Do you know what could have caused this behaviour? It's nothing important, since it's a correct dump, it's just curiosity.
Try to use 20240401 version.
https://github.com/saramibreak/DiscImag … g/20240401
Try to use 20240401 version.
https://github.com/saramibreak/DiscImag … g/20240401
I just did, and indeed it shows no errors now. That's good to know. What changed between versions that fixed this error?
http://forum.redump.org/topic/55215/neo … odown-iii/
When dumped with DiscImageCreator, it does not produce a CATALOG in the cuesheet. When dumped with redumper, it does. Which one is correct?
DIC logs: https://drive.google.com/file/d/1tBKDvZ … sp=sharing
What changed between versions that fixed this error?
- changed the descrambling range
Which one is correct?
According to the _subReadable.txt, there is not MCN flag in the subchannel.
Redump Forum → General discussion → DiscImageCreator
Powered by PunBB 1.4.4, supported by Informer Technologies, Inc.
Currently installed 6 official extensions. Copyright © 2003–2009 PunBB.