1 Topic by yamboo-efi (edited by yamboo-efi 2010-12-12 23:06:04)

  • Registered: 2009-12-31
  • Posts: 30

I have some games with this protection (visible circle in the surface) and get lot of errors. How i do the dump, replacing with zeros.

Thanks

  • Registered: 2008-09-26
  • Posts: 875

If I were you I'd stay away as far as possible from these discs... I tried to dump one of them a few months ago, nearly drove me insane.

You can't use IsoBuster here. Use ddump or CloneCD with these profiles. We need the defective sectors to be all 0x55, not 0x00. You MUST dump the disc at least twice with different drives. Some drives don't catch some of the error sectors, I don't know.

I could never get a consistent read on that disc I tried, so after countless retries I gave up. Maybe you have better luck. But be warned, it can take over a week for a single pass to finish depending on your drive...

  • Registered: 2009-12-31
  • Posts: 30

Ok, thanks. I ask before because the time necessary for every dump is very long, and i want to be sure that make it right. In some days i post the results.  smile

  • Registered: 2011-02-20
  • Posts: 1,745

Is there any idea and info for good dumping?
I have two disc with this protection and I found that unreadable sector have existed approximately 765 in PROTECT.PRO file.

DiscImageCreator, UmdImageCreator, Conv2multiBin, bin2wav, PS3Auth (needs login), recompressTo7z_20150109.bat

sarami's Website

  • Registered: 2006-12-24
  • Posts: 3,847

A little offtopic, but Jackal recently had problems with a disc with twin-sectors protection and DIC, it wasn't able to read them (twin-sectors) properly.

6 Reply by MrX_Cuci (edited by MrX_Cuci 2015-04-25 00:13:06)

  • Registered: 2008-03-02
  • Posts: 810

Seems Alcohol 120% does the trick: http://www.cdmediaworld.com/hardware/cd … tech.shtml Filetypes supported for RingProtech: http://support.alcohol-soft.com/knowled … ge+Formats

  • Registered: 2011-02-20
  • Posts: 1,745

F1ReB4LL wrote:

Jackal recently had problems with a disc with twin-sectors protection and DIC, it wasn't able to read them (twin-sectors) properly.

Yes, I know. As redump.org, if a ripping guide with other tools is created, I can code in DIC in the same way as it.

MrX_Cuci wrote:

Seems Alcohol 120% does the trick: http://www.cdmediaworld.com/hardware/cd … tech.shtml Filetypes supported for RingProtech: http://support.alcohol-soft.com/knowled … ge+Formats

Thanks! This is very useful.
BTW, I want to support a mds/mdf file in the future, but I don't understand a correct specification of mds.
I know this document.
http://www.cryer.co.uk/file-types/m/mds/mds.txt
If somebody knows it anything else, could you tell me?

DiscImageCreator, UmdImageCreator, Conv2multiBin, bin2wav, PS3Auth (needs login), recompressTo7z_20150109.bat

sarami's Website

  • Registered: 2014-06-08
  • Posts: 470

http://problemkaputt.de/psx-spx.htm#cdr … alcohol120


sarami wrote:
F1ReB4LL wrote:

Jackal recently had problems with a disc with twin-sectors protection and DIC, it wasn't able to read them (twin-sectors) properly.

Yes, I know. As redump.org, if a ripping guide with other tools is created, I can code in DIC in the same way as it.

MrX_Cuci wrote:

Seems Alcohol 120% does the trick: http://www.cdmediaworld.com/hardware/cd … tech.shtml Filetypes supported for RingProtech: http://support.alcohol-soft.com/knowled … ge+Formats

Thanks! This is very useful.
BTW, I want to support a mds/mdf file in the future, but I don't understand a correct specification of mds.
I know this document.
http://www.cryer.co.uk/file-types/m/mds/mds.txt
If somebody knows it anything else, could you tell me?