MrX_Cuci wrote:

I have a disc here that is error free with other tools. DIC detects errors. I tried a different drive, same hashes and error free.

Could you tell me the all your ripping drive? (vendor, model, firmware version)

reported by Imgburn: PLEXTOR DVDR   PX-708A 1.12 (ATA)

Info:
http://www.cdrinfo.com/Sections/Reviews … cleId=8181

Found another:
CATALOG 0000000000000
FILE "TerraOEM.bin" BINARY
  TRACK 01 MODE43/2352
    INDEX 01 00:00:00

MrX_Cuci wrote:

Found another:
CATALOG 0000000000000
FILE "TerraOEM.bin" BINARY
  TRACK 01 MODE43/2352
    INDEX 01 00:00:00

Uploaded 20150522

655 (edited by MrX_Cuci 2015-05-31 10:08:57)

Securom v3 or less doesn't seem to work correctly. I get different hashes then ISObuster, CloneCD and CD Manipulator dump

This dump matches my ISOBuster, CloneCD and CD Manipulator dump: http://redump.org/disc/18323/

MrX_Cuci wrote:

Securom v3 or less doesn't seem to work correctly. I get different hashes then ISObuster, CloneCD and CD Manipulator dump

This dump matches my ISOBuster, CloneCD and CD Manipulator dump: http://redump.org/disc/18323/

Securom v3 or less is subchannel protection (like libcrypt). So the cause that the hash varies is different.

So no need to report anomalies with securom?

But I want to know why the hash is different.

659 (edited by MrX_Cuci 2015-05-31 19:12:08)

Any clue why I get this error? https://dl.dropboxusercontent.com/u/35528562/DIC.jpg
Logs: https://dl.dropboxusercontent.com/u/355 … eltica2.7z

About Securom, I can upload clonecd, isobuster, cd mainpulator dump and the one from DIC if that helps?

Uploaded test ver.

MrX_Cuci wrote:

About Securom, I can upload clonecd, isobuster, cd mainpulator dump and the one from DIC if that helps?

All DIC log plz.

Uploaded test ver.
- fixed: detect adr sector
- fixed: Label Gate CD, XCP disc

662 (edited by MrX_Cuci 2015-06-04 21:57:01)

https://dl.dropboxusercontent.com/u/355 … adowMan.7z (should be up in a few minutes) Used latest test version

MrX_Cuci wrote:

https://dl.dropboxusercontent.com/u/355 … adowMan.7z (should be up in a few minutes) Used latest test version

The reason of the huge sub & c2 error is unknown at this time, but possibly the difference of read cd command might affect the result... (possibly clonecd, isobuster, cd manipulator use 0xbe. DIC uses 0xd8)

Logs are for securom v3 and lower purpose. I don't mind the huge sub and c2

sarami wrote:

possibly the difference of read cd command might affect the result... (possibly clonecd, isobuster, cd manipulator use 0xbe. DIC uses 0xd8)

- added: /be option for cd

        /be     Use 0xbe as ReadCD command

- improved: c2 error fixing (& omitted /c2 val 4)

sarami, any chance you can add command line support for replacing ALL sectors with C2 errors by '55' pattern?

PX-760A (+30), PX-W4824TA (+98), GSA-H42L (+667), GDR-8164B (+102), SH-D162D (+6), SOHD-167T (+12)

iR0b0t wrote:

sarami, any chance you can add command line support for replacing ALL sectors with C2 errors by '55' pattern?

What kind of disc needs it? If you can, could you tell me the disc titile and other info.

CodeLock   http://redump.org/discs/quicksearch/cod … ction/only

and other discs which use intentional c2 errors in combination with any other protections.

You could set this custom command in priority to EccEdc, which is "/rc" i think.

PX-760A (+30), PX-W4824TA (+98), GSA-H42L (+667), GDR-8164B (+102), SH-D162D (+6), SOHD-167T (+12)

670 (edited by Jackal 2015-07-06 06:10:02)

is SafeDisc dumped with '55' pattern finally? using /rc parameter?

Also:

[00:09] <iR0b0t> if CD.IDX is known to be a protected file ranges and is not used in other games which are not protected then you can let sarami know about it, he will include it into the DIC to skip the reserved ranges by this file and replace them by '55'

But the CD.idx file is oversized so I don't know if that will work.

I found this.
ftp://ftp.t10.org/t10/document.95/95-104r0.pdf
http://www.pioneerelectronics.com/pio/p … ManV31.pdf
So, I coded a new option to test.

Option Info
        /d8     Use 0xd8 as ReadCD command forcibly (for data disc)
iR0b0t wrote:

CodeLock   http://redump.org/discs/quicksearch/cod … ction/only

and other discs which use intentional c2 errors in combination with any other protections.

You could set this custom command in priority to EccEdc, which is "/rc" i think.

I don't have these protect disc. plz wait.

Jackal wrote:

is SafeDisc dumped with '55' pattern finally? using /rc parameter?

I think so.

sarami wrote:

I found this.
ftp://ftp.t10.org/t10/document.95/95-104r0.pdf
http://www.pioneerelectronics.com/pio/p … ManV31.pdf
So, I coded a new option to test.

Option Info
        /d8     Use 0xd8 as ReadCD command forcibly (for data disc)

What's different about this?

Jackal wrote:

But the CD.idx file is oversized so I don't know if that will work.

The first allocated sector of this file should be known and if there is for any reason a faked file end sector it can be calculated = next allocated file/folder start sector - 1. It should work.

PX-760A (+30), PX-W4824TA (+98), GSA-H42L (+667), GDR-8164B (+102), SH-D162D (+6), SOHD-167T (+12)

sarami wrote:
iR0b0t wrote:

CodeLock   http://redump.org/discs/quicksearch/cod … ction/only
and other discs which use intentional c2 errors in combination with any other protections.
You could set this custom command in priority to EccEdc, which is "/rc" i think.

I don't have these protect disc. plz wait.

The range which is protected has no allocated file, just to let you know, sarami.

PX-760A (+30), PX-W4824TA (+98), GSA-H42L (+667), GDR-8164B (+102), SH-D162D (+6), SOHD-167T (+12)

By the way sarami, one of my SafeDisc 1.35.000 games crashes on DIC if used /rc parameter.

Console output:

OS
        Windows 7 Home Premium Service Pack 1 32bit
AppVersion
        x86, AnsiBuild, Jun 14 2015 17:40:27
/rc val is omitted. set [60]
CurrentDir
        C:\Users\user\Desktop\folder
InputPath
         path: dic_PX-760A
        drive:
          dir:
        fname: dic_PX-760A
          ext:
Start: 2015-07-05(Sun) 12:10:57
Checking reading lead-out
Read command: 0xd8, Subcode reading mode: Pack
Creating bin from 335414 to 335414 (LBA) 335414
Reading lead-out: OK
[F:ReadCDForVolumeDescriptor][L:880] GetLastError: 8, F³r diesen Befehl ist nich
t gen³gend Speicher verf³gbar.

Log files below:

Post's attachments

(SafeDisc 1.35.000) (ID_7447) (Crash).zip 2.49 mb, 16 downloads since 2015-07-12 

You don't have the permssions to download the attachments of this post.
PX-760A (+30), PX-W4824TA (+98), GSA-H42L (+667), GDR-8164B (+102), SH-D162D (+6), SOHD-167T (+12)