1 Topic by Danfun64

  • Danfun64
  • Guest

Hello.

I have recently purchased a GDR-8084N for the purpose of ripping Wii discs. This is the result.

PS C:\Users\Danfu\Documents\emulation\DiscImageCreator_20200204\Release_ANSI> .\DiscImageCreator.exe dvd D spaceoddity.iso 4
AppVersion
        x86, AnsiBuild, 20200204 162151
CurrentDirectory
        C:\Users\Danfu\Documents\emulation\DiscImageCreator_20200204\Release_ANSI
WorkingPath
         Argument: spaceoddity.iso
         FullPath: C:\Users\Danfu\Documents\emulation\DiscImageCreator_20200204\Release_ANSI\spaceoddity.iso
            Drive: C:
        Directory: \Users\Danfu\Documents\emulation\DiscImageCreator_20200204\Release_ANSI\
         Filename: spaceoddity
        Extension: .iso
StartTime: 2020/03/16(Mon) 18:58:30
Set the drive speed: 5540KB/sec
LBA[000000, 0000000]: [F:ReadBufferCapacity][L:720]
        Opcode: 0x5c
        ScsiStatus: 0x02 = CHECK_CONDITION
        SenseData Key-Asc-Ascq: 05-20-00 = ILLEGAL_REQUEST - INVALID COMMAND OPERATION CODE
LBA[000016, 0x00010]: [F:ReadVolumeDescriptor][L:503]
        Opcode: 0xa8
        ScsiStatus: 0x02 = CHECK_CONDITION
        SenseData Key-Asc-Ascq: 03-11-00 = MEDIUM_ERROR - UNRECOVERED READ ERROR
lpCmd: a8, 00, 00, 00, 00, 10, 00, 00, 00, 01, 00, 00
dwBufSize: 2048
LBA[000016, 0x00010]: [F:ReadDVDForFileSystem][L:848]
        Opcode: 0xa8
        ScsiStatus: 0x02 = CHECK_CONDITION
        SenseData Key-Asc-Ascq: 03-11-00 = MEDIUM_ERROR - UNRECOVERED READ ERROR
EndTime: 2020/03/16(Mon) 18:58:50

If the github page wasn't in error, I was wondering if I need to swap firmware in order to get it to run, and if so, with what firmware. Does anybody have any suggestions, or should I refund the GDR-8084N and instead get a different drive?

Quote Post 1

  • From: North East UK
  • Registered: 2016-06-15
  • Posts: 1,061

One of the guys more proficient with Ninty dumping will confirm but i think the correct syntax for that system is

Discimagecreator.exe dvd <drive letter> "path\filename.iso" <speed> /raw

try tagging that /raw onto the end of your cmd and see if it helps.

Quote Post 2

3 Reply by Danfun64

  • Danfun64
  • Guest

This is the result I get

C:\Users\Danfu\Documents\emulation\DiscImageCreator_20200204\Release_ANSI> .\DiscImageCreator.exe dvd D spaceoddity.iso  8 /raw
AppVersion
        x86, AnsiBuild, 20200204 162151
CurrentDirectory
        C:\Users\Danfu\Documents\emulation\DiscImageCreator_20200204\Release_ANSI
WorkingPath
         Argument: spaceoddity.iso
         FullPath: C:\Users\Danfu\Documents\emulation\DiscImageCreator_20200204\Release_ANSI\spaceoddity.iso
            Drive: C:
        Directory: \Users\Danfu\Documents\emulation\DiscImageCreator_20200204\Release_ANSI\
         Filename: spaceoddity
        Extension: .iso
StartTime: 2020/03/16(Mon) 21:26:48
Set the drive speed: 11080KB/sec
LBA[000000, 0000000]: [F:ReadBufferCapacity][L:720]
        Opcode: 0x5c
        ScsiStatus: 0x02 = CHECK_CONDITION
        SenseData Key-Asc-Ascq: 05-20-00 = ILLEGAL_REQUEST - INVALID COMMAND OPERATION CODE
This drive doesn't define in driveOffset.txt
Please input drive offset(Samples):

Quote Post 3

4 Reply by Danfun64

  • Danfun64
  • Guest

I should have mentioned this hours ago, but I realized that the drive offset was indeed mentioned in the driveoffset.txt file, and began the slow process of ripping one of my Wii games. Also, I admit that the github wiki did mention the /raw command, but I missed it in my first attempt. I successfully ripped the game.

https://imgur.com/dGEjn3X

Quote Post 4