Simple question - how I can I extract PVD info from IBM PC discs ? Disc Image Creator will do this for me ?

At the moment I don't have access to my plextor (moved into PC at my work) so I can't test DIC.

2 (edited by reentrant 2017-09-15 15:34:55)

Sector 16, offset 320-370 in isobuster.
Newest DIC puts PVD to one of the log files.

Ok, I'll try new DIC, thanks for info.

4 (edited by haynor666 2017-09-19 20:54:28)

Well, and I still don't know where this PVD data is in this DIC mess hmm
Exact location, please ?

EDIT. Ok but what exactly I should put there to validate data?

Example for interstate '76 install disc:

0000000000000000 0000000000000000 0000000000000000 0000000000000000 ?

30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 00
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 00
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 00
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 00  ?

You can find it in *_mainInfo.txt

copy whole lines like follows

0320 : 20 20 20 20 20 20 20 20  20 20 20 20 20 32 30 30                200
0330 : 30 31 32 31 32 31 30 33  39 33 39 30 30 00 32 30   0121210393900.20
0340 : 30 30 31 32 31 32 31 30  33 39 33 39 30 30 00 30   00121210393900.0
0350 : 30 30 30 30 30 30 30 30  30 30 30 30 30 30 30 E0   000000000000000.
0360 : 30 30 30 30 30 30 30 30  30 30 30 30 30 30 30 30   0000000000000000
0370 : E0 01 00 00 00 00 00 00  00 00 00 00 00 00 00 00   ................
PX-760A (+30), PX-W4824TA (+98), GSA-H42L (+667), GDR-8164B (+102), SH-D162D (+6), SOHD-167T (+12)

6 (edited by haynor666 2017-09-19 21:16:53)

That works, thanks smile

If you can attach all DIC files to your posts (exclude all large files: *.bin, *.img, *.scm and *_sub.txt)

If you use the best compression rate your archives will be like 2 MB at max.

PX-760A (+30), PX-W4824TA (+98), GSA-H42L (+667), GDR-8164B (+102), SH-D162D (+6), SOHD-167T (+12)

8 (edited by haynor666 2017-09-19 21:24:07)

Final question - Errors count. Where to get this info ?

Interstate files attached.

Post's attachments

Int.7z 1.42 mb, 18 downloads since 2017-09-19 

You don't have the permssions to download the attachments of this post.

9 (edited by idlord 2017-09-20 02:48:29)

You can get the Error Count by using CDmage, open the cue file, then highlight Track 1 located under Session 1, and hit 'Scan for Corruption'.