Probably crc32 of track02 is wrong. Checksum of track02 of my copy is the same as in (U)
~ meow ~
- kitzik
- Dumper
- Offline
2 2009-03-11 14:31:57 (edited by fuzzball 2009-03-11 14:33:55)
- fuzzball
- Dumper
- Offline
EAC again --> same results
CDRWIN & manually adjust offset --> same as (U) version
EAC's extracting status
Test Track 2
Reading Track
Sync Error
Test Done
Copy Track 2
Reading Track
Sync Error
Copy OKEAC's log
Track 2
Filename C:\redump.org\Track 02.bin
Pre-gap length 0:00:02.00
Suspicious position 0:02:00
Peak level 100.0 %
Track quality 99.5 %
Test CRC 6158A6B7
Copy CRC 6158A6B7
Copy finished- fuzzball
- Dumper
- Offline
What is the cause of this problem? EAC?
- iR0b0t
- Administrator
- Offline
For the first track(02) overreading into lead-in, for the last track overreading into leadout (?)!
PX-760A (+30), PX-W4824TA (+98), GSA-H42L (+667), GDR-8164B (+102), SH-D162D (+6), SOHD-167T (+12)
- fuzzball
- Dumper
- Offline
I dumped Track 2 by other drive(GSA-H62N).
'Sync Error' didn't occur.
And checksum was correct. (same as (U) version)
Uh... 
I didn't add this dump some days ago because of the error in the log, but apparently some other mods don't pay attention to this 
7 2009-03-12 13:51:42 (edited by fuzzball 2009-03-12 13:58:43)
- fuzzball
- Dumper
- Offline
Jackal wrote:
I didn't add this dump some days ago because of the error in the log, but apparently some other mods don't pay attention to this
EAC log:
There were errorsUntil now I had completely overlooked this message.
I rechecked previous log, but the other errors weren't found. 
Thanks Jackal.