• iR0b0t
  • iR0b0t
  • Administrator
  • Offline
  • From: Research equipment
  • Registered: 2008-02-21
  • Posts: 6,177

already corrected some, but here is the rest, it should be re-viewed

                                      id    master_sid    mould_sid
http://redump.org/disc/1977        M1S2
[FIXED]http://redump.org/disc/8256    IFPI LL08    M1S2
http://redump.org/disc/9911    LB41   
[FIXED]http://redump.org/disc/11687    A01   
[FIXED]http://redump.org/disc/15465    A03   
[FIXED]http://redump.org/disc/15465    A05   
[FIXED]http://redump.org/disc/15465    A04   
http://redump.org/disc/18723    L 401    IFPI 6820
http://redump.org/disc/18727    L 401    IFPI 6810
http://redump.org/disc/18750    L 401   
http://redump.org/disc/19843    L036    IFPI 3082
http://redump.org/disc/20699    12   
http://redump.org/disc/20760    IFPI L327    IFPO-50A5
http://redump.org/disc/20970        46VI   <<< should be 45VI imho, plus moved to additional mould text field
[FIXED]http://redump.org/disc/20990    IFPI L558    B1
[FIXED]http://redump.org/disc/21047    A06   
[FIXED]http://redump.org/disc/21276    A00   
[FIXED]http://redump.org/disc/21499    0MM   
http://redump.org/disc/21812    LN39    NS03
[FIXED]http://redump.org/disc/22464    A09   
http://redump.org/disc/22908    A0

most of them are missing "IFPI" string or simply mistaken column positions

PX-760A (+30), PX-W4824TA (+98), GSA-H42L (+667), GDR-8164B (+102), SH-D162D (+6), SOHD-167T (+12)
  • Registered: 2008-09-26
  • Posts: 875

http://redump.org/disc/18723    L 401    IFPI 6820
http://redump.org/disc/18727    L 401    IFPI 6810
http://redump.org/disc/18750    L 401

I've double-checked these discs, the rings are absolutely correct (i.e., as they appear on the disc). Not sure if L 401 is supposed to be the mastering SID code, though. It's written much smaller than the rest of the ring and in a different position, so I assume it has nothing to do with the mastering code. Sorry, I can't provide a picture, my camera doesn't catch letters this small smile

  • Registered: 2010-05-09
  • Posts: 1,304

Corrected some of the errors which where just mistakes in column position.