EAC detect a Track 02 pregap of 0 seconds:
On that picture I go back 150 sectors:
My drive is Slimtype - DVD A DS8A3S (Correction Offset is +6)
What value 'Combined Offset' I must use in EAC?
このソフトは かいはつちゅうです
EAC has a bug when there is 1 data track and 1 audio track.
3 2014-10-18 16:11:48 (edited by Rocket 2014-10-18 16:14:27)
- Rocket
- Dumper
- Offline
So, I must set combined value +8 (+2 and +6) in EAC? Or maybe +7 (+1 and +6)? Or what?
That discs:
このソフトは かいはつちゅうです
Rocket wrote:
So, I must set combined value +8 (+2 and +6) in EAC? Or maybe +7 (+1 and +6)? Or what?
That discs:
I would say +8 for EAC in this case if your scrambled sector length is 0x20 (=32/4=8). This assumes that you have a 2:00 pregap (i have seen 3:00 and 4:00 and others on PSX disks too).
- Rocket
- Dumper
- Offline
ack2121 wrote:
I would say +8 for EAC in this case if your scrambled sector length is 0x20 (=32/4=8). This assumes that you have a 2:00 pregap (i have seen 3:00 and 4:00 and others on PSX disks too).
Hmmm... Ok. I'll dump Track 2 with +8 (+2 and +6), but dump must be added with Yellow Light status.
このソフトは かいはつちゅうです
There's no point in adding dumps with yellow status.. You can try extracting with IsoBuster extract from-to and then correcting the offset with hex editor.. see if it matches EAC dump with dummy pregap added.
I thought you have a plextor drive now, Rocket? 