<![CDATA[Redump Forum — PerfectRip & CDRWIN Cannot See My SATA Drive]]> 2013-09-16T20:32:07Z PunBB http://forum.redump.org/topic/13201/perfectrip-cdrwin-cannot-see-my-sata-drive/ <![CDATA[Re: PerfectRip & CDRWIN Cannot See My SATA Drive]]> Just a thing, you have installed the authentic CDRWin (the developed by Golden Hawk, not the "another one"), haven't you?

]]> http://forum.redump.org/user/12852/ 2013-09-16T20:32:07Z http://forum.redump.org/post/44980/#p44980 <![CDATA[Re: PerfectRip & CDRWIN Cannot See My SATA Drive]]> Just updating this thread with my findings. Things started working once I:

  • Installed my IDE PCI-E adapter (which allowed me to hookup my Plextor drives)

  • Installed FrogASPI to enable ASPI compatibility on Windows 7 64-bit

  • Updated my drive's firmware to the latest version

My SATA drive shows up on CDRWin now, though I haven't tried using it to rip based on iR0B0t's comments (above). I suspect the older versions of CDRWin are better suited for IDE drives only...which is good to know, I suppose. wink

Cheers!
-MrTikki-

]]> http://forum.redump.org/user/62338/ 2013-09-16T19:34:26Z http://forum.redump.org/post/44978/#p44978 <![CDATA[Re: PerfectRip & CDRWIN Cannot See My SATA Drive]]> http://img707.imageshack.us/img707/8682/u05m.png

PLEXTOR DVDR   PX-755A: Attached to a JMB363 based card, externally (eSATA), it's actually a PX-755SA.

HL-DT-STCD-RW GCE-8526B and PIONEER DVD-RW  DVR-107D: Attached to a SiI-680 card.

Both cards have the option ROM erased, therefore aren't bootable.

The OS I'm running is Windows Server 2003 R2 SP2, with no ASPI layers installed ( and no intentions to install them).

]]> http://forum.redump.org/user/12852/ 2013-09-11T23:02:45Z http://forum.redump.org/post/44927/#p44927 <![CDATA[Re: PerfectRip & CDRWIN Cannot See My SATA Drive]]> That's a bit of a bummer about the SATA adapters, but I did just buy a PCI-E card that will provide a dedicated IDE adapater. Sounds like it's similar to that SiI-680, so perhaps that will "trick" it (???). I'll post my results if it works.  smile

Also, I got the suggestion to use CDRWIN for some DC dumping from tossEAC (or rather from a guide he sent me). I have pablogm123's suggestions as well, so I was simply going to run both and see which one worked best. However, I ran into the same issue with CDRWIN not seeing my drive, so I wondered if there was something related to the SATA drivers.

Sounds like the myth is certainly "Plausible"...  big_smile

]]> http://forum.redump.org/user/62338/ 2013-09-11T22:44:04Z http://forum.redump.org/post/44926/#p44926 <![CDATA[Re: PerfectRip & CDRWIN Cannot See My SATA Drive]]> For me, PF and CDTool (both by the same guy, Truman) work perfectly with these kind of drives:

-Internals connected to a SiI-680 PCI card.
-Externals connected via eSATA, JMB-363 card.
-Externals connected via USB 2.0.

Both use the standard SPTI layer, nothing special required. Try running it with administrator privileges.

I don't know anything about CDRWin because I don't run this program.

]]> http://forum.redump.org/user/12852/ 2013-09-11T21:52:38Z http://forum.redump.org/post/44925/#p44925 <![CDATA[Re: PerfectRip & CDRWIN Cannot See My SATA Drive]]> cdrwin has very limited support, mostly ide only, directly connected drives, no adapters! (because of outdated drivers)

]]> http://forum.redump.org/user/4357/ 2013-09-11T21:42:15Z http://forum.redump.org/post/44924/#p44924 <![CDATA[PerfectRip & CDRWIN Cannot See My SATA Drive]]> So I've run into this issue with CDRWIN and PerfectRip now, and so I thought I'd go ahead and ask the question: does PerfectRip (and CDRWIN for that matter) only scan for IDE drives? My current drive is a SATA drive, and neither program can detect it.

Figured I'd answer this question for future reference once and for all. smile

Cheers!
-MrTikki-

]]> http://forum.redump.org/user/62338/ 2013-09-11T21:33:56Z http://forum.redump.org/post/44923/#p44923